Stoplight Switch Adjustment - Honda CTX200 Owner's Manual

64
Main fuse
The fuse (1) is located behind the right side cover.
The specified fuse is:
15 A
1. Remove the right side cover (page 32).
2. Disconnect the wire connector (2) of the starter
magnetic switch.
3. Pull out the old fuse and install a new fuse.
The spare main fuse (3) is located under the starter
magnetic switch (4).
4. Reconnect the connector and install the right side
cover.
(2)
(4)
(3)
(1) Fuse
(1)
(2) Wire connector
(3) Spare fuse
(4) Starter magnetic switch

Stoplight Switch Adjustment

(Refer to the Safety Precautions on page 43.
Check the operation of the stoplight switch (1) at the
right side behind the engine from time to time.
Adjustment is done by turning the adjusting nut (2).
Turn the nut in the direction (A) if the switch operates
too late and in direction (B) if the switch operates too
soon.
(1)
(B)
(A)
(2)
Owner´s Manual
)
(1) Stoplight switch
(2) Adjusting nut