Pioneer EFX-1000 Service Manual page 89

5
3. Downloading the .mot file into the EFX-1000
Turn on the EFX-1000. Click on the Connect icon to
activate connection of the EFX-1000 with the PC.
If the display shown below appears, the connection has
been successfully made.
Right-click on the .mot file and select Download File.
Downloading will start.
5
6
When the message "Image successfully written to device"
is displayed, downloading has been finished.
• Confirming if downloading has been successfully
completed
Right-click on the .mot file, and select Compare File →
Device Checksum.
Check the values enclosed in the frames in the illustration
below. If these two values are the same, downloading has
been successfully completed.
4. Exiting from the program
Click on the Disconnect icon to deactivate connection of the
EFX-1000 with the PC.
Turn off the EFX-1000, and unplug the cables of the
RS-232C jig.
EFX-1000
6
7
7
8
A
B
C
D
E
F
89
8