Connection Panel - Pioneer EFX-1000 Service Manual

5

• Connection Panel

1 Power input socket (AC IN)
Use the provided power cord to connect this socket to anAC
outlet.
2 POWER switch
3 Digital OUTPUT fs SELSECT switch
Use to change the digital output frequency sampling rate
(fs) (44.1kHz/48kHz/96kHz).(default : 96kHz)
4 Link input/output connector (EFX LINK)
When the accessory digital link cable is used
to connect this connector to the DJ-mixer DJM-1000 (with
digital link support), digital link functions can be used,
permitting a variety of new functions.
CAUTION:
The EFX LINK connector is designed to be connected
via the provided digital link cable ONLY to a component
equipped with the designated digital link function.
The unit may be damaged if this connector is
mistakenly connected to any other component.
5 MIDI input/output connectors
(MIDI OUT, MIDI IN)
Use to connect the effector to a MIDI component .
6 Digital input/output connectors
(DIGITAL IN, DIGITAL OUT)
Use to connect the effector to a component provided with
coaxial digital input/output connectors.
7 Foot switch jack (FOOT SW)
Can be connected to a ON/OFF type foot switch with
6.3mm phone plug to allow ON/OFF control of effects.
Foot switches are available in several types, including
press-ON, press-OFF, and latching-type ON/OFF.
loops as this will cause circuit oscillations which could
damage the speakers.
[Example of connections that must not be
performed]
8 Input/output gain select switch (IN&OUT LEVEL)
Use to select the input/output gain (–10dB / +4dB).
(default : –10dB)
5
6
1 2 3
6 7
6
7
4 5
8 9
9 Audio INPUT/OUTPUT jacks
Uses 6.3mm phones plug. For monaural inputs, connect L
input channel only for output on both L and R channels.
Audio inputs are throughput (output) even when the unit's
power is turned OFF.
10 Audio INPUT/OUTPUT jacks
INPUT/OUTPUT connectors using RCA pin jacks.
Audio inputs are throughput (output) even when the unit's
power is turned OFF.
CAUTION:
Do not make any connections that may create signal
loops as this will cause circuit oscillations which could
damage the speakers.
EFX-1000
7
8
10
8
A
B
C
D
E
F
101