Pioneer EFX-1000 Service Manual page 86

1
A
Instruction Manual for Flash Development Tool Kit
Preparation: Connect the EFX-1000 and your PC, using the RS-232C jig.
Note: After the above connection is made, when the EFX-1000 is turned on, it will enter Writing mode. In Writing mode, all the
LEDs remain unlit. However, when the EFX-1000 is turned on or off, it clicks.
• How to confirm the port to be used on your PC
Double-click on System in Control Panel, or right-click on
My Computer and select System Properties. Click on the
B
Hardware tab and select Device Manager. You can confirm
the port at Port (COM and LPT).
C
Set the baud rate of the port to be used to 19200.
Example: COM1
Double-click on the port name to be used.
D
E
F
86
1
2
Click on the Port Setting tab and select 19200 in the bps
box.
Click on OK. The setting is completed.
EFX-1000
2
3
3
4
4