Echo DSRM-200 Instruction Manual page 18

OPERATION
If the Stop switch does not stop the trimmer, remove the battery to stop the power supply to trimmer.
Have your authorized ECHO servicing dealer repair stop switch before using trimmer again. If the
trimmer head does not stop when the trigger and trigger lockout are released, remove the battery to
stop the power supply to trimmer. Have your authorized ECHO servicing dealer repair the trigger
and trigger lockout before using trimmer again.
When the stop switch is in the "I" position:
• If the LED remains lit, operation is normal.
• If the LED is off, battery pack was installed when the stop switch was at the "I" position. Slide stop switch to
the "0" position, and then return to the "I" position.
• If the LED flashes once per second, the unit has stopped due to overload or battery overheating.
- If the cutting attachment has grass or other foreign objects causing overload, turn the unit off and remove
the battery. Remove the blockage before reinstalling battery and turning trimmer back on.
- If the battery is overheated, turn the trimmer off and remove the battery. Allow the battery to cool before
reinstalling and turning trimmer back on.
• If the LED flashes five times per second, the battery's power level is below 10%. Charge or change the
battery.
18
DSRM-200
X7508161200
© 3/2014 ECHO Inc.