Sram Installation; Sync. Sram (Pipeline Burst Sram); Cpu Installation And Jumpers Setup - Gigabyte GA - 586STX User Manual

SIMM 1/2
128MB * 2pcs.
128MB * 2pcs.
128MB * 2pcs.
128MB * 2pcs.
128MB * 2pcs.
128MB * 2pcs.
128MB * 2pcs.
128MB * 2pcs.
128MB * 2pcs.

3.5. SRAM INSTALLATION

Sync. SRAM (Pipeline Burst SRAM)

If Sync SRAM Chip is installed, it consists of Pipeline Burst 1 Pc 64 K x 64
512KByte.
There is no jumper for cache size setting.

3.6. CPU INSTALLATION AND JUMPERS SETUP

The system speed depends on the frequency of CLOCK GENERATOR. The
user can change SW selection to set up the system speed to 60 or 66 or 75
MHz for 3.3V/2.5V Pentium ® Processor (90-233 MHz) / AMDK5(PR133 /
PR166) / AMD-K6(166/180/200(2.9V)/233(3.2V)), Cyrix / IBM 6x86 (PR150+
/ PR166+/ PR200+), Cyrix / IBM 6x86L (PR150+/PR166+/PR200+ (2.8V)),
Cyrix / IBM 6x86MX (PR166 (60x2.5 2.9V) / PR200 (66x2.5 2.9V) (75x2
2.9V)/ PR233 (66x3 2.9V) (75x2.5 2.9V)).
The mainboard can use Pentium ® Processor, P54CT, MMX or P54CTB,
AMDK5, AMD-K6, Cyrix / IBM 6x86, CPU, and the CPU speed must match
with the frequency of CLOCK GEN. It will cause system hanging up if the
CLOCK GEN.'S frequency is faster than CPU's.
DIMM1 DIMM2
8MB 16MB
16MB 16MB
8MB 32MB
16MB 32MB
32MB 32MB
8MB 64MB
16MB 64MB
32MB 64MB
64MB 64MB
3-9
Hardware Installation
TOTAL
280MB
288MB
296MB
304MB
320MB
328MB
336MB
352MB
384MB