Table of Contents
Advertisement
GA-586STX
M
The CPU is a sensitive electric component and it can be easily
damaged by static electricity, so users must keep it away from
metal surface when theCPU is installed onto mainboard.
M
When the user installs the CPU on socket, please notice that the
PIN 1 of CPU is in the same corner as the PIN 1 of socket!
M
Before the CPU is installed, the mainboard must be placed on a flat
plane in order to avoid being broken by the pressure of CPU
installation.
3.7. CMOS RTC & ISA CFG CMOS SRAM
Built-in Real Time Clock (RTC) With 256B CMOS SRAM in SiS5582.
3.8. SPEAKER CONNECTOR INSTALLATION
There is always a speaker in AT system for sound purpose. The 4 - Pins
connector SPK is used to connect speaker. The speaker can work well in
both direction of connector when it is installed to the SPK connector of
mainboard.
3.9. POWER LED & KEY LOCK CONNECTOR INSTALLATION
There is a system power LED light and a key on the panel of case. The
power LED will light on when system is powered-on, and the key can lock or
unlock the keyboard input, both are connected to a 5 PIN connector. The
connector should be installed to PWR of mainboard in correct direction.
3.10. HARDWARE RESET SWITCH CONNECTOR INSTALLATION
The RESET switch on panel provides users with HARDWARE RESET
function which is almost the same as power-on/off. The system will do a cold
start after the RESET switch is pushed and released by user. The RESET
switch is a 2 PIN connector and should be installed to the RST jumper of the
mainboard.
3.11. SOFTPW2
Press first time to power on system. Second time to power off system.
3-10
Advertisement
Chapters
Table of Contents
