Table of Contents
Advertisement
Hardware Installation
3.12. SOFTPW1
Press the button to enter green mode or hold the button for over 4 secs. to
turn off the system.
3.13. PERIPHERAL DEVICE INSTALLATION
After installation of the device and setup of the jumpers, the mainboard can
be mounted into the case and fixed by screw. To complete the mainboard
installation, the peripheral devices could be installed now. The basic system
needs a display interface card and a storage device.
If a PCI - Bus device is to be installed in the system, any one of four PCI -
Bus slots can be used for Slave or Master PCI - Bus device.
After installing the peripheral device, the user should check everything again
and prepare to power-on the system.
3.14. KEYBOARD SETTING FUNCTION
After booting the O.S., there are some special functions used by keyboard as
follows:
−
"CTRL_ALT_DEL"
Pressing these keys simultaneously will cause
system to Warm Start (Software Reset).
3-11
Advertisement
Chapters
Table of Contents
