User Maintenance; Cleaning The Micro Fibre Pads - Piranha JJB-603 User Manual

• At this time, start to push and pull the Steam Mop over the floor as if you
are vacuuming the floor.
• If you need to stop cleaning the floor i.e. you need to move an object, or
the phone rings, and steam is still being ejected from the base, press the
On / Off switch on the back of the Steam Mop and then place the Steam
Mop on the rubber mat supplied.
• When the steam flow stops, and the Green indicator light goes out, the
water in the tank has been consumed. To refill, always disconnect the
plug from wall socket and let the Steam Mop cool before removing the
Water Fill Cap.
9

User Maintenance

WARNING: The plug must be removed from the power socket before any
maintenance, cleaning or replacing the Micro Fibre Pads.
NOTE: To maximise the performance of your steam mop, you should clean
the microfiber pads regularly.

9.1 Cleaning the Micro Fibre Pads

The Micro Fibre Pads must be cleaned regularly for best cleaning
performance.
To remove the Micro Fibre Pad, ensure the steam mop is unplugged,
empty of water and cool.
Grasp the corner of the Micro Fibre Pad and peel back to release the
Velcro strips.
Simply wash the Micro Fibre Pads in warm mild soapy water, rinse in
clean fresh cold water and let dry.
The Micro Fibre Pads may be washed in a washing machine on a
Normal Wash.
DO NOT scrub the Micro Fibre Pads or Tumble Dry.
Page 8 of 10