Accessories; Kits, Options And Accessories - Lincoln Electric POWER Wave AC/DC 1000 Operator's Manual

C-1

KITS, OPTIONS AND ACCESSORIES

OPTIONAL KITS AND ACCESSORIES
K2282-1 Power Wave System Interface
The optional Power Wave System Interface provides
the means to synchronize the AC wave shapes of up
to four different arcs to a common carrier frequency.
This frequency can range from 10 hertz to 300 hertz,
with the most practical range being 10 to 100 hertz. It
can also control the phase relationship between arcs
to reduce the effects of welding related issues such as
"Arc Blow".
K2444-1 CE – C-Tick Filter Kit
This external filter kit is available for the K2344-2
Power Wave AC/DC 1000, and mounts directly to the
reconnect area on the rear of the machine. The filter is
necessary to meet CE conducted emission require-
ments.
The Power Wave AC/DC 1000 is shipped with a CD including software tools and other documents related to the
integration, configuration, and operation of the system. The Power Wave Submerged Arc Utilities CD includes
the following items and all of the documentation to support them.
Name
Weld Manager
Command Center
Submerged Arc Cell Configuration
Production Monitoring
Diagnostics Utility
Weld Manager
(Palm Application)

ACCESSORIES

SOFTWARE TOOLS
Purpose
Setup Ethernet address information, and apply security settings.
AC/DC system tool to observe and log welding operation, verify
DeviceNet welding configuration, and facilitate quality analysis.
Used to configure and verify a multi-arc or parallel connected power
source (more than one Power Wave per arc) systems.
Allows user to setup Production Monitoring options on the Power Wave
including Email notification, Shift Timers, Wire Package Tracking. Also
provides means to retrieve statistical welding data, generate machine
reports, and update the Power Wave Firmware and Welding Software.
Utility to diagnose Power Wave problems, read system information, cali-
brate output voltage and current, test sense leads, and diagnose feed
head issues. Can also setup and verify DeviceNet operation.
Palm based utility used to configure, backup and restore various Power
Feed 10A Controller settings (can be used to copy settings from one
PF-10A to another). Also provides means to retrieve version information
and setup Ethernet address of the local Power Wave system (only those
components directly connected to the PF-10A via ArcLink).
POWER WAVE® AC/DC 1000
C-1