Getting Started - Primus Single Zone Owner's Manual

Fridge/freezers
Table of Contents

Advertisement

Getting Started

Installation
After unpacking the Fridge/Freezer check that no
parts are missing. Place the unit in a dry place
which is protected against splashing water. Do not
place directly adjacent to sources of heat such as
heating, gas ovens, hot water, pipes or under the
blazing sun.
It is important that your appliance is installed and
operated in accordance with these instructions to
guarantee its performance, efficiency and operation.
Application and
operative cooling range
The cooling compartment has varying temperature
zones. The values indicated on the digital
display are related to the middle of the cabinet.
The Single Zone Fridge/Freezer is designed to
either refrigerate or freeze food. The Flexi Zone
Fridge/Freezer can be used as either a fridge or a
freezer or both simultaneously. The Fridge/Freezer
may be used for outdoor use such as for camping
purposes. If you wish to refrigerate medicines,
first check to ensure the Fridge/Freezer's cooling
capacity meets the demands of the respective
medicines. The Fridge/Freezer is designed to
operate in ambient temperatures between -10°
and +55° C in a maximum air humidity of 90%.
The Fridge/Freezer can operate continuously
at an angle of 30° maximum.
Fig. 1
Note: The normal operation of the appliance
requires heat to be radiated away from the
condenser located at the end of the cabinet.
Adequate airflow is required around the
compressor at all times. (Fig. 1).
The cooling system has been designed to operate
correctly when the appliance is positioned on
angles up to 30 degrees. It is recommended
that the time the unit is exposed to angles over
30 degrees is limited to a maximum of four (4)
hours continuous operation. (Fig. 2).
30°
Fig. 2
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexi zone +

Table of Contents