Advertisement
Getting to know your
portable Fridge/Freezer
IDENTIFICATION
1. Brand
7. Lid inner liner
2. Handle
8. PVC lid frame
3. Insulated lid
9. Temperature controller
4. Baskets
10. Side handle
5. Door gasket
11. Lid hinge
6. Latch
WARRANTY
• The fridge is covered for a period of 36 months from date
of purchase.
• In the case of warranty repair or service please call Primus Service
on 1300 555 197 for your nearest approved service agent.
• Proof of purchase (receipt) and ownership must be supplied for all
warranty repairs.
ITEMS NOT COVERED UNDER WARRANTY
• Loss of food or goods caused by failure of the unit.
• All costs associated with the return of the unit to an approved service
agent is at the owner's expense.
• Loss of time, income or associated costs for accommodation or
transport as a direct result of a failure is not covered under the warranty.
• Primus reserves the right, at their discretion, to repair or replace any
unit returned under warranty.
12. Feet
13. Grill panel
14. Drain plug
15. AC connector
16. DC connector
3 YEAR
AUSTRALIA WIDE
WARRANTY
CUSTOMER SERVICE
1300 555 197
enquires@primusaustralia.com.au
Installation & operation of
your Fridge/Freezer
It is important that your appliance is installed &
operated in accordance with the manufacturer's
instructions to guarantee the performance,
efficiency and operation.
• Position the appliance in a safe and
secure location. Limit exposure to heat
sources or direct sunlight which can affect
the unit's performance and efficiency.
• The normal operation of the appliance
requires heat to be radiated away from the
condensers located in the front and end of
the cabinet. Adequate airflow is required to be
available around the compressor at all times.
• The cooling system has been designed
to operate correctly when the appliance
is positioned on angles up to 35
degrees. It is recommended that the
time the unit is exposed to angles over
30 degrees is limited to a maximum of
four (4) hours continuous operation.
• Your appliance can be used as either
a freezer or a refrigerator, it cannot
be used as both simultaneously.
POWER REQUIREMENTS
The Fridge/Freezer is designed to operate on AC
& DC voltage inputs.
AC INPUT
Voltage is required to be 240V AC at 50Hz.
DC INPUT
Voltage is required to be either 12 or 24V DC.
The power system is fitted with an Automatic
Voltage Change over program; this will allow for
both the AC & DC power cords to be connected
to the appliance at the same time. The AC power
input has priority and the unit will select this input
over DC if both are being provided.
Once the AC power is shut off the appliance
will switch over to DC power. The compressor
will then not start immediately as the controller
will program itself for the change in supply and
within 3 minutes the unit will restart using the
DC input. This same process will be taken if
AC power is resupplied to the appliance.
WIRELESS 'IN CAR' REMOTE
TEMPERATURE READ OUT
When your appliance is first connected to the
DC input, the internal cabinet temperature can
be displayed on the wireless 'in car' remote
temperature read out when it is connected to a
separate DC power source.
STEP 1.
Connect your fridge & set the desired cabinet
temperature.
STEP 2.
Plug the wireless 'in car' read out into a 12V DC
outlet socket a maximum of 10 metres from the
fridge. The digital read out will show the cabinet
temperature and battery voltage. The cabinet
temperature information will be updated every
2 minutes.
www.primusaustralia.com.au
Advertisement
