Single Zone Operation - Primus Single Zone Owner's Manual

Single Zone Operation

1
Input Voltage Display
2
Up Button
3
Down Button
4
Power On/Off Button
5
Mode Button
6
Battery Monitor Display
7
Temperature Display
8
Mode Display
Power – Off and On
1. Press and hold the power button
seconds and the unit will power off
2. Press and hold the power button
seconds and the unit will power up and display
the current cabinet temperature
Eco Function – Setting
3. Press the mode button twice (2)
the current function will flash
4. Adjust between Eco & Max by pressing the
up button for Max or down
5. The selected function will continue to flash
for 3 to 5 seconds
Cabinet Temperature – Setting
1. Press the mode button once (1)
the temperature display will flash with the
current setting.
2. Adjust the temperature by pressing up
to increase and down
the selected temperature is reached
Note: Maximum temperature settings are from
-18°C to 10°C.
3. The selected temperature will flash on the
display for 3 to 5 seconds before displaying
the current cabinet temperature
7
6
5
for 2 to 3
for 2 to 3
and
button for Eco
and
to decrease until
Battery Monitor – Setting
1. Press the mode button three times (3)
and the battery monitor will flash with the
current setting
2. Adjust the setting by pressing the up
or down button until the desired setting
is shown.
3. The selected setting will continue to flash
for 3 to 5 seconds
12V DC Input Cut out
H (High)
M (Medium)
L (Low)
24V DC Input Cut out
H (High)
M (Medium) 22.3V
L (Low)
8 1 2
4 3
Cut in
11.1V 12.4V
10.1V 11.4V
9.6V 10.9V
Cut in
24.3V 25.7V
23.7V
21.3V 22.7V
9