Table of Contents
Advertisement
DATALOGIC
Connections should always be made with power off!
CAUTION
Apply power to C-GRYPHON by connecting a power supply unit to the connector
on the base of the battery charger.
C-GRYPHON is ready to charge Gryphon™ M Series readers with NiMh or NiCd
batteries.
Power Supply
C-GRYPHON power supply connector
SERIAL CONFIGURATION OPTIONS
In addition to the battery charge function C-GRYPHON can be connected to a
PC by means of an RS232 interface either to send new configuration strings
from the PC to the reader or to upgrade application software onto the
Gryphon™ M reader.
Power Supply
Host interface connector
To proceed with these operations, connect an RS232 cable between
C-GRYPHON and the PC. Connect the power supply to C-GRYPHON. Place
the Gryphon™ M reader onto the charger.
2
Advertisement
Table of Contents
