Texas PowerLine TG500B Instruction Manual page 18

10. Transport and storage
To avoid any spillage of fuel and oil is it important that the engine is placed horizontal
during transport.
- Let the engine run till it stops.
Loosen the drainscrew on the carburettor and drain the remaining fuel.
-
Reinstall the drainscrew, and mount the fuelline.
-
Keep the fuel in an approved container.
-
Remove the sparkplug cap
Change the oil, remove the drainscrew and drain the oil. Keep the oil in an approved
container.
Add new oil.
See fig 9
Remove the sparkplug and poor 1 tablespoon of oil into the cylinder, mount the
sparkplug.
Do not mount the sparkplug cap. Pull the sparking cord, until there is resistance. This
will close the valves and protect them from rust.
Protect the oil with a thin layer of oil to avoid rust.
Store the engine in a dust free environment, out of reach of children.
Mount the sparkplug cap before use.
STORAGE
OILCHANGE
STORAGE
18