MTU 12V2000M94 Operating Instructions Manual page 141

Abbrevia- Meaning
tion
ISO International Organization for Stand-
ardization
KGS Kraftgegenseite
KS Kraftseite
LCD Liquid Crystal Display, Liquid Crystal
Device
LCU Local Control Unit
LED Light Emitting Diode
LMU Local Monitoring Unit
LO Low
LOLO Low Low
LOP Local Operating Panel
LOS Local Operating Station
MCS Monitoring and Control System
MG Message
MPU Microprocessor Unit, Microprocessing
Unit
MRG Main Reduction Gear
OT Oberer Totpunkt
P-xyz Pressure-xyz
PAN Panel
PCU Propeller Control Unit
PIM Peripheral Interface Module
PT Power Turbine
RCS Remote Control System
RL Redundancy Lost
SAE Society of Automotive Engineers
SAT Sea Acceptance Test
SD Sensor Defect
SDAF Shut Down Air Flaps
SOLAS International Convention for the Safety
of Life at Sea
SS Safety System
SSK Schnellschlussklappe(n)
SSS Synchronized Self-Shifting (clutch)
STBD Starboard
T-xyz Temperature-xyz
TD Transmitter Deviation
UT Unterer Totpunkt
VS Voith Schneider
WJ Water jet
Explanation
International umbrella organization for all national
standardization institutes
Engine free end in accordance with DIN ISO 1204
Engine driving end in accordance with DIN ISO 1204
LOP subassembly
LOP subassembly
Alarm: Measured value lower than 1st minimum limit
value
Alarm: Measured value lower than 2nd minimum limit
value
Control console, control panel
Top Dead Center (TDC)
Pressure measuring point xyz
Control panel
Alarm: Redundant CAN bus missing
U.S. standardization organization
Alarm: Sensor failure
Emergency-air shutoff flap(s)
Safety system alarm
Emergency air shut-off flaps
Temperature measuring point xyz
Alarm: Deviation in transmitter values
Bottom Dead Center (BDC)
Voith Schneider drive
Water jet drive
MS150061/06E 2016-02 | Appendix A | 141