Table of Contents
Advertisement
Installing a wireless card driver
Install a wireless card driver onto the personal computer in order to use the wireless
card.
The following section describes the operation when using an optional wireless
card (ET-CDWL1).
Fitting and removal of wireless card into/from
personal computer
Insertion of wireless card
With the side of power monitor
facing up, insert the card into the
PC card slot until it reaches the
depth.
Pay attention to the difference between the
up and down sides of the wireless card.
Notes:
• Refer carefully to the instruction manual supplied with the PC.
• Forcible insertion of the wireless card in a wrong direction may cause a fault.
Removal of wireless card
q q Quit Wireless Manager if using it.
w w Left-click the icon for PC card (
the bottom right corner of the
screen.
Note:
• If no PC card icon is appearing on the task bar at the bottom right of the screen, go
to Start menu - Setting - Control panel, open PC card, click the Show control on the
task bar check box, and then press the OK button.
e e Select and click Stop Panasonic
Wireless Card.
r r Press the OK button and remove the
wireless card.
Personal computer
) shown on the task bar at
Wireless card
E
-85
NGLISH
Advertisement
Table of Contents
