Tint; Sharpness; Tv System; Colour Hue Setting - Panasonic PT-AE200E Operating Instructions Manual

TINT
(NTSC/NTSC 4.43/YPsPR/SD CARD
only)
This adjusts the flesh tones in the
picture. Press the • button to make
flesh tones more greenish, and
press the • button to make the
flesh tones more reddish.
SHARPNESS
Press the • button to make the
picture details sharper, and press
the • button to make the picture
details softer.
TV SYSTEM
(S-VIDEO/VIDEO/AV1 only)
ITV--SYSTEM
q AUTO1 I'H-
&
14 AUTO2 I'l
I_1 MTSO I'l
14MTSC4. '_ 3 I'l
14
PAL
_'1
14 PAL--M I'l
14 PA L --1"4 _'1
14 SECAM I'l
AUTO1 The projector
automatically distinguishes
between NTSC/NTSC
4.43/PAL/PAL60/SECAM
signals.
AUTO2 The projector
automatically distinguishes
between NTSC/PAL-
M/PAL-N signals.
This should normally be set to
"AUTO1" or "AUTO2". If the signal is
of such poor quality that the correct
format cannot be automatically
distinguished, change the setting
manually to the required TV system.
Colour Hue Setting
(colour temperature)
ICOLOUR
TEMP. 4 -2
}1_=
14
-i
)1
,&
14 0 )1
14 +z )1
14 +2 )1
14 USER )1
* "USER" will not be displayed by
PT-AE200E.
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
USER (PT-AE300E only)
This item lets you make fine
adjustments to the colour
temperature.
(])Press the • or • buttons to
select the "USER" and press the
ENTER button.
ICOLOUR
TEMP. _ USER bl
(_ Press the • or • buttons to select
an item and adjust the setting by
pressing the • or • buttons.
...... _<>la69 H R TEMP.
CONTRAST B 0
"_ SELECT BNTER BC
BRITRT R 0 ==_
BRITHT B 0 =_
If the white area of the picture
appears bluish, adjust CONTRAST
B or BRIGHT B to a lower setting or
adjust the CONTRAST R or
BRIGHT R to a higher setting.
If it appears reddish, adjust
CONTRAST R or BRIGHT R to a
lower setting or adjust the
CONTRAST B or BRIGHT B to a
higher setting.
Adjust settings using CONTRAST R
or CONTRAST B under normal
conditions.
ENGLISH-35