Table of Contents
Advertisement
TG8411NZ(e).book Page 26 Thursday, March 26, 2009 3:27 PM
Programming
3
{V}/{^}: "Display Mode" i M
4
{V}/{^}: Select the desired setting.
i M i {ih}
Note:
L When A is displayed as a right soft
key on the handset, you can
temporarily switch the display mode
by pressing A (page 13).
L When in multiple items display mode,
you can move screens by pushing the
joystick right or left, without scrolling
down or up through the list:
– Push the joystick right to go to the
next screen.
– Push the joystick left to return to the
previous screen.
Selecting area codes to be
deleted automatically
In some situations, phone numbers
stored automatically in the caller list
(page 31) will include area codes. If you
do not want to dial the area codes when
making calls from the caller list, you can
store the area codes which you want the
unit to delete automatically.
Example: You have stored the area
code "09". If you make a call from the
caller list to the phone number "09-456-
7890", the unit dials "456-7890".
1
1 (centre of joystick) i ! i
M
2
{V}/{^}: "Area Code" i M
3
Enter an area code (5 digits max.).
i M i {ih}
Note:
L The use of this feature can prevent a
National Call from being dialled. E.g.,
in the case of the South Island, the
"03" will be omitted and will therefore
prevent a National Call to other areas
of the South Island.
26
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign
up to 6 phone numbers to be restricted,
and select which handsets are to be
restricted. Storing area codes here
prevents the restricted handsets from
dialling any phone number in that area
code.
1
1 (centre of joystick) i ! i
M
2
{V}/{^}: "Call Restrict" i
M
3
Enter the base unit PIN (default:
"0000").
L If you forget your PIN, contact
your nearest Panasonic service
centre.
4
Set which handsets to be restricted
by pressing the desired handset
number.
L All the registered handset
numbers are displayed.
L Flashing numbers indicate call
restriction is turned on for the
corresponding handset.
L To turn call restriction off for a
handset, press the number again.
The number stops flashing.
5
M
6
{V}/{^}: Select a memory location.
i M
7
Enter the phone number or area
code to be restricted (8 digits max.).
i M i {ih}
L To erase a restricted number,
press ^.
Advertisement
Table of Contents
