TP-Link TL-ER6120 User Manual page 64

The following items are displayed on this screen:
General

Protocol:
Source IP:
Destination IP:
Source Port:
Destination Port:
WAN:
Effective Time:
Figure 3-40 Policy Routing
Select the protocol for the entry in the drop-down list. If the protocol you
want to set is not in the list, you can add it to the list on 3.3.4.4 Protocol
page.
Enter the source IP range for the entry. 0.0.0.0 - 0.0.0.0 means any IP is
acceptable.
Enter the destination IP range for the entry. 0.0.0.0 - 0.0.0.0 means any
IP is acceptable.
Enter the source Port range for the entry, which is effective only when the
protocol is TCP, UDP or TCP/UDP. The default value is 1 – 65535, which
means any port is acceptable.
Enter the destination port range for the entry, which is effective only when
the protocol is TCP, UDP or TCP/UDP. The default value is 1 – 65535,
which means any port is acceptable.
Select the WAN port for transmitting packets.
Specify the time for the entry to take effect.
-58-