TP-Link TL-ER6120 User Manual page 24

Service Name:
Primary DNS:
Secondary DNS:
Secondary Connection:
Connection Type:
IP Address:
Subnet Address:
Status:
Upstream Bandwidth:
Downstream Bandwidth:
PPPoE Status

Status:
Optional. Enter the Service Name provided by your ISP. It's null by
default.
Enter the IP address of your ISP's Primary DNS.
Optional. Enter the IP address of your ISP's Secondary DNS.
Here allows you to configure the secondary connection. Dynamic IP
and Static IP connection types are provided.
Select the secondary connection type. Options include Disable,
Dynamic IP and Static IP.
If Static IP is selected, configure the IP address of WAN port. If
Dynamic IP is selected, the obtained IP address of WAN port is
displayed.
If Static IP is selected, configure the subnet address of WAN port. If
Dynamic IP is selected, the obtained subnet address of WAN port is
displayed.
Displays the status of secondary connection.
Specify the bandwidth for transmitting packets on the port.
Specify the bandwidth for receiving packets on the port.
Displays the status of PPPoE connection.
"Disabled" indicates that the PPPoE connection type is not

applied.
"Connecting" indicates that the router is obtaining the IP

parameters from your ISP.
"Connected" indicates that the router has successfully obtained

the IP parameters from your ISP.
"Disconnected" indicates that the connection has been

manually terminated or the request of the router has no
-18-