Display Issue: Pixel Anomalies - HP ZBook 17 G3 Maintenance And Service Manual

Display Issue: Pixel Anomalies

All HP notebook displays adhere to strict quality and reliability specifications. A small percentage of display
panels may have minor cosmetic manufacturing anomalies or irregularities such as bright or dark dots in the
viewable area. These cosmetic imperfections are common to all display panel types and are not specific to
any HP model or product line.
All display panel defects should be examined at the highest possible resolution using both the brightest and
darkest possible backgrounds, because some sub-pixel failures may not be readily visible under certain
conditions.
● Type 1: Bright dot on a dark background = Always On
● Type 2: Dark dot on a bright background = Always Off
● Combination = in any combination and any color that are always on or off
Use the HP PC Hardware Diagnostics (UEFI) tool to determine numbers of pixels and their distance. HP uses
the following set of criteria when damaged displays are submitted for warranty coverage.
Source: HP Notebook PCs and Tablets - About LCD Panel Defects and Terminology for Notebook PCs and
Tablets
Table 7-8 Electrical defect allowances
Panel resolution
Sub-pixel faults
VGA, SVGA, SD, WSVGA, XGA, 720p, SD+, WXGA, HD
WXGA+, SXGA+, HD+, SXGA+
WSXGA+, UXGA, FHD, WUXGA
QHD, QHD+, WQXGA, UD
Electrical defect clusters (defects within a 5x5 pixel block)
Minimum distance between ANY allowable defects (unless otherwise specified)
Cluster with 2 or more sub-pixels with sub-pixel faults
Dim lines
Cross line(s) on/off
Horizontal line(s) on/off
Vertical line(s) on/off
NOTE: All LCD panel defects should be examined at the highest possible resolution using both the brightest
and darkest possible backgrounds, as some sub-pixel failures may not be readily visible under certain
conditions.
NOTE: Contact support for assistance if issues are not listed.
146 Chapter 7 Troubleshooting guide
Accept Reject
N ≤ 2 Type 1 N ≥ 3 Type 1
N ≤ 2 Type 2
N ≤ 3 Type 1 N ≥ 4 Type 1
N ≤ 3 Type 2
N ≤ 4 Type 1 N ≥ 5 Type 1
N ≤ 4 Type 2
N ≤ 5 Type 1 N ≥ 6 Type 1
N ≤ 5 Type 2
S ≥ 25 mm S < 25 mm
Not allowed
Not allowed
Not allowed
Not allowed
Not allowed