Reset To Factory Defaults - Ness Security Products Securityguard III Programming Manual

DEFALT

RESET TO FACTORY DEFAULTS

Erase devices and/or default options as required.
PHONE1, PHONE2 and CLIENT will only be cleared if programming timeout has not disabled
reprogramming of these options. SecurityGuard will jump to the start of PROGRAM mode,
displaying KEY 1.
Erases all programmed devices and defaults all options
ALL
OPTION Defaults all option values
Erases all keys
KEY
SENSOR Erases all detectors; defaults SENSOR 1 (main PIR)
P-EXIT PROGRAM MODE EXIT/CONTINUE
•
Press ON to exit PROGRAM mode.
•
Press OFF to step to first program option.
•
If the OFF button is pressed, LEARN will be displayed. By then pressing ON, READY will
be flash and the unit will be ready to learn a new code (radio key or device)
Doc ID. SG3PROG00103_03_2014.DOC 23