Ness Security Products Securityguard III Programming Manual page 20

V-ARM VOICE ANNUNCIATION ARM/DISARM (default = ON)
OFF Armed and disarmed events not annunciated
Armed and disarmed events annunciated
ON
V-ALRM VOICE ANNUNCIATION ALARM (default = ON)
OFF Alarm events not annunciated
Alarm events annunciated
ON
V-BATT VOICE ANNUNCIATION LOW BATTERY (default = ON)
OFF Low battery events not annunciated
Low battery events annunciated
ON
V-FALT VOICE ANNUNCIATION FAULT (default = ON)
OFF System faults not annunciated
System faults annunciated
ON
V-FAI VOICE ANNUNCIATION FAI (default = OFF)
Sales presentation not annunciated
OFF
Sales presentation annunciated
ON
OPEN OPEN/CLOSE REPORTS (default = OFF)
Open/close reports are messages sent to the monitoring station each time the system is
ARMED or DISARMED, including which user (user ID) operated the system.
Enabled
ON
Disabled
OFF
LOWBAT LOW BATTERY REPORTING (default = NONE)
No low battery reporting
NONE
MAIN Report low main battery
Report low detector batteries
SENSOR
ALL Report low main and detector batteries
CLIENT CLIENT ACCOUNT NUMBER (default = 0000)
After a period of 30 days following PROGRAM mode EXIT, this option can only be
reprogrammed via remote Up/download (option hidden in local PROGRAM mode).
•
Press ON to view programmed client account number. The first digit will flash.
•
Press ON to step through values for the first digit (0-9).
•
Press PANIC to store the digit. The second digit will now flash.
•
Repeat for remaining digits.
•
Press PANIC to store last digit, and first digit will flash.
•
Repeat programming procedure to make corrections, or press OFF to return to top level
Client Account number
0000-
Doc ID. SG3PROG00103_03_2014.DOC 20