Peavey XR s Operating Manual page 7

Channel Strip for Channel 8
USB MEDIA JACK (CH. 8)
21
CH. 3
A-type USB connector that a removable data storage device can be connected to playback music
USB Playback:
First, select the proper input for channel 8 by sliding the input selection switch (23) to the
USB position. The bottom of the LCD display will say "Insert USB drive".
Insert your USB drive into the USB Media Jack (21) at the top of channel 8. The Media Player
min max
will now enter "Folder Navigation Mode". In this mode, you can scroll through a list of all
folders on the USB drive. Once you select a folder, the Media Player will enter "Song Navigation
Mode" which allows you to scroll through a list of all songs contained in the selected folder. If
there are no songs in the selected folder, the LCD will display "No Songs". To return to Folder
Navigation Mode, scroll to the very beginning of the list and select the <FOLDERS> option.
high high
Once a song is finished playing, the Media Player will automatically start playing the next song.
Once the Media Player reaches the last song, it will automatically loop back to the beginning of
the list.
22
min max
BLUETOOTH ACTIVE LED (CH 8)
The blue "Bluetooth Active LED" indicates the status of the Bluetooth connection. If the LED
is off, the Bluetooth module is powered off. If the LED is slowly flashing, the XRs is not paired
with any device, but is available for connection.. When the LED is lit solid, the source device is
properly paired to the mixer and ready to play.
Bluetooth Operation:
max min max
To listen to music via the Bluetooth wireless connection, you must first pair (link) your XRs
mixer with your Bluetooth phone and/or music device.
Turn off any Bluetooth devices previously paired with the XRs mixer.
clip clip
Turn on the Bluetooth feature on your phone or music device.
min max
Make sure the XRs is ready for a Bluetooth connection.
The Bluetooth Active LED should be blinking and the LCD will say, "Bluetooth Input".
sig sig
Place your phone or music device in Bluetooth search mode. The phone or music device will
begin searching for the XRs.
Select "Peavey Mixer" from the search results on your phone or music device.
max min max
3
You will be prompted to enter a pin number. Enter the pin#, it is 7878.
LEVEL
If the pairing is successful, the Bluetooth Active LED will stop blinking and stay lit.
You are now ready to begin streaming through Bluetooth to the mixer. The level can be adjusted
from the connected source or by the level control in Channel 8.
The XRs mixer will remember up to 10 devices that it was previously paired with and will automat-
ically connect to the last device with which it was paired when turned on. To clear the paired device
memory, make sure the mixer is in Bluetooth mode and press and hold the Previous button (35),
Play/Pause button (36), and Next button (37) for 5 seconds. The XRs mixer will ask if you would
like to clear the Bluetooth memory. Select "Y" using the Media Select knob to clear the memory.
The XRs mixer will go through the process of clearing the memory, which should take approxi-
mately 15 seconds.
CH. 4 CH. 5
min
min max
high
min max min
min max min
clip
min max min
sig
min max min
4 5
LEVEL LEVEL
CH. 6
max min max
high high
max min max
max min max
clip clip
max min max
sig sig
max min max
6
LEVEL
7
CH. 7 CH. 8
23
IN
min max
24
min
high
25
min max min
26
min
min max
27
clip
min max min
sig
30
min max min
7 8
LEVEL LEVEL
DIGITAL EFF
21
USB MEDIA
22
USB
USB ME
63 125
+12
max
+6
0
-6
-12
MONITOR
max
63 125
+12
+6
max
0
-6
-12
clip
MAIN
28
max
29
sig
max
min/o
LEVEL
F
F