Phantom Power Led - Peavey XR s Operating Manual

Media Input
GLOBAL PHANTOM POWER
18
This switch, when depressed, applies +48 VDC to all input XLR connectors to power microphones that need phantom power to work.
This switch applies +48 VDC voltage to the input XLR connectors to power microphones requiring phantom power.
If phantom power is used, do not connect unbalanced dynamic microphones or other devices to the XLR
inputs that cannot handle this Voltage.

PHANTOM POWER LED

19
This LED shines when the PHANTOM POWER is activated.
POWER AMP 2 ASSIGN
20
This switch allows the user to select the signal that is assigned to power amp 2 (52). The user can either elect to send the Main mix signal or
the Monitor mix signal to the second internal power amplifier. This allows the user to run both power amps for mains or use power amp 1 for
mains and power amp 2 for monitors.
6