Replacement Procedures
Remove the Fingerprint
1. Pull out the fingerprint cable from connect CN14
2. Loose below screws from fingerprint board and take it out top case
M2.5x4.0
Installing the Fingerprint
1. Turn over top case and put fingerprint in correct location
2. Fix below screws and connect the fingerprint cable CN14
M2.5x4.0
Satellite U300 and Satellite Pro U300 Maintenance Manual (960-Q08)43
FLAT BIND screw
Figure 4-24 Removing the Fingerprint
FLAT BIND screw
x2
M2.5x4.0
x2