Toshiba Satellite Pro U300 Maintenance Manual page 111

Test Program for Field.
TOSHIBA Satellite(Pro) U300 Diagnostics
Version V1.00 (C) Copyright QUANTA Corp. 2005-
[ DIAGNOSTICS MENU ]
01. DIAG
02. RUNNING TEST
03. DISK UTILITIES
0 4. LOG
05. SYST
01. SYSTEM TEST
01. SYSTEM TEST
06. OPT ON
02. MEMORY TEST
99. EXIT
03. KEYBOARD TEST
04. DISPLAY TEST
05. FLOPPY DISK TEST
06. HARD DISK TEST
07. REAL TIME CLOCK TEST
Use the arrow keys to highlight the desired option and press Enter.
Go To Test
Move the highlight bar to Go To Test and press Enter to start executing the test.
Test Loop
Select NO to return the screen to the subtest menu after the test is complete.
Select YES to set the test to run continuously until it is halted by the user.
Error Stop
Select NO to keep the test running even if an error is found.
Select YES to stop the test program when an error is found and display the HALT
OPERATION screen as shown below:
[[ HALT OPERATION ]]
1: Test end
2: Continue
3: Retry
These three selections have the following functions:
1: Terminates the test program and exits to the subtest menu.
2: Continues the test from the error.
3: Restarts the test from the beginning.
Use the arrow keys to move the cursor to the desired option and press Enter.
Table 3-1 in Section 3.3 lists the function of each test on the subtest menu. Table 3-2 in
Section 3.15 lists the error codes and error status for each error.
Satellite U300 and Satellite Pro U300 Tests and Diagnostics Manual
[ TEST PARAMETER ]
NO STIC TEST
01. FAN ON/OFF 01. FAN ON/OFF
01. Go To Test
01. Go To Test
02. Batter
02. Test Loop :
03. CPU T
[ DIAGNOSTIC TEST MENU ]
03. Error Stop :
UTILITIES
99. Exit
EM CONFIG URATION
I
[ SYSTEM TEST ]
y Test
YES
e mperature
NO
to DIAGNOSTIC TEST MENU
09. REAL TIME CLOCK TEST
10. NPX TEST
11. HIGH RESOLUTION DISPLAY TEST
12. MULTIMEDIA TEST
13. USB TEST
14. MEMORY2 TEST
88. FDD&HDD ERROR RETRY COUNT SET
99. EXIT TO DIAGNOSTICS MENU
: :Select item
ESC :Escape
7