DeWalt DW089LR Quick Start Manual page 4

EN
User Manual
Contents
• Safety
• Product Overview
• Batteries and Power
• Operation
• Accuracy Check and Calibration
• Specifications
User Safety
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal injury which,
if not avoided, may result in property damage.
If you have any questions or comments about this or any dewalt
tool, call 1-800-4-DeWALT (1-800-433-9258)
or go to www.dewalt.com on the Internet.
WARNING:
Read and understand all instructions. Failure to follow
the warnings and instructions may result in electric shock,
fire and/or serious injury.
SAVE THESE INSTRUCTIONS
WARNING:
Laser Radiation Exposure. Do not disassemble or
modify the laser level. There are no user serviceable
parts inside. Serious eye injury could result.
6
WARNING:
Hazardous Radiation. Use of controls or
adjustments or performance of procedures other than
those specified herein may result in hazardous
radiation exposure.
The label on your tool may include the following symbols.
V volts
mW milliwatts
laser warning symbol
nm wavelength in nanometers
2 Class 2 Laser
Warning Labels
For your convenience and safety, the following labels are on
your laser.
WARNING: To reduce the risk of injury, user must
read instruction manual.
5002595
≤1.5mW @ 630-680nm
IEC 60825-1: 2014
WARNING: LASER RADIATION. DO NOT STARE
Laser Artwork
INTO BEAM. Class 2 Laser Product
5002595
≤1.5mW @ 630-680nm
IEC 60825-1: 2014
Visual Result
5002595
5002595
≤1.5mW @ 630-680nm ≤1.5mW @ 510-530nm
IEC 60825-1: 2014 IEC 60825-1: 2014
Laser Artwork Laser Artwork
5002595
5002595
≤1.5mW @ 630-680nm ≤1.5mW @ 510-530nm
IEC 60825-1: 2014 IEC 60825-1: 2014
Visual Result
Visual Result
5002595
≤1.5mW @ 510-530nm
• Do not operate the laser in explosive atmospheres, such
IEC 60825-1: 2014
as in the presence of flammable liquids, gases, or dust.
Laser Artwork
Power tools create sparks which may ignite the dust or fumes.
• Use the laser only with the specifically designated
batteries. Use of any other batteries may create a risk of fire.
5002595
≤1.5mW @ 510-530nm
IEC 60825-1: 2014
• Store idle laser out of reach of children and other
untrained persons. Lasers are dangerous in the hands of Visual Result
untrained users.
• Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be
suitable for one laser, may create a risk of injury when used on
another laser.
• Tool service must be performed only by qualified repair
personnel. Service or maintenance performed by unqualified
personnel may result in injury. To locate your nearest DeWALT
service center call 1-800-4-DeWALT (1-800-433-9258) or go to
www.dewalt.com on the Internet.
• Do not use optical tools such as a telescope or transit to
view the laser beam. Serious eye injury could result.
• Do not place the laser in a position which may cause
anyone to intentionally or unintentionally stare into the
laser beam. Serious eye injury could result.
• Do not position the laser near a reflective surface which
may reflect the laser beam toward anyone's eyes. Serious
eye injury could result.
• Turn the laser off when it is not in use. Leaving the laser on
increases the risk of staring into the laser beam.
• Do not modify the laser in any way. Modifying the tool may
result in hazardous laser radiation exposure.
• Do not operate the laser around children or allow children
to operate the laser. Serious eye injury may result.
• Do not remove or deface warning labels. If labels are
removed user or others may inadvertently expose themselves
to radiation.
• Position the laser securely on a level surface. Damage to
the laser or serious injury could result if the laser falls
Laser Information
• The DW089LR, DW089LG 3-Beam 360° Line Laser and
the DW0811LR, DW0811LG 2-Beam 360° Line Laser are
Class 2 laser products. The lasers are self-leveling laser
tools that can be used for horizontal (level) and vertical
(plumb) alignment projects.
This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant
to laser Notice 50, dated June 24, 2007.
Conforms to UL STDS 61010-1 & 2595
Certified to CSA STD C22.2 No. 61010-1
WARNING:
Read and understand all instructions. Failure to follow
all instructions listed below may result in electric shock, fire
and/or serious personal injury.
Work Area
• Keep your work area clean and well lit. Cluttered benches and
dark areas invite accidents.
• Do not operate laser tools in explosive atmospheres, such as in
the presence of flammable liquids, gases, or dust.
• Keep children and bystanders away while operating a laser tool.
Distractions can cause you to lose control.
Electrical Safety
• Use battery operated tool only with the specifically
designed batteries. Use of any other batteries may create a
risk of fire.
Product Overview
WARNING:
Never modify the tool or any part of it. Damage to the
laser or personal injury could result.
Figure 2 -
A
Battery Interface
Figure 1A -
B
Pendulum Lock
Figure 1B -
C
Keypad
Figure 1B -
D
ON/OFF button: horizontal laser line
Figure 1B -
E
ON/OFF button: side laser line
Figure 1B -
ON/OFF button: front vertical laser line
F
(DCE089R/G only)
Figure 2 -
G
Magnetic pivot bracket
Figure 4 -
I
Tripod thread fitting (1/4 - 20 & 5/8 -11)
Figure 1B -
J
Battery level indicator
Figure 5 -
K
Ceiling Mount Clamp
Figure 5 -
L
Ceiling Mount
Figure 5 -
M
Screw Hole
7