Change The Remote Access Pin Code (For D135); Charge The Handset; Check The Battery Level; What Is Standby Mode - Philips D130 Extended User Documentation

Change the remote access
PIN code (for D135)
Note
•
The default answering machine remote access PIN
code is 0000 and it is important to change it to ensure
the security.
1
Press / or MENU/OK > [ANSW
MACHINE] > MENU/OK.
2
Select [REMOTE ACC.] > [CHANGE
PIN], then press MENU/OK to confirm.
3
Enter the old PIN/passcode, then press
MENU/OK to confirm.
4
Enter the new PIN/passcode, then press
MENU/OK to confirm.
5
Enter the new PIN/passcode again, then
press MENU/OK to confirm.
» The setting is saved.

Charge the handset

Place the handset on the base station or the
charging cradle to charge the handset. When
the handset is placed correctly on the base
station, you hear a docking sound.
» The handset starts charging.
Note
•
Charge the batteries for 8 hours before first use.
•
If the handset becomes warm when the batteries are
being charged, it is normal.
You can activate or deactivate the docking tone.
Your phone is now ready to use.

Check the battery level

The battery icon displays the current battery
level.
When the handset is off the base
station/charger, the bars indicate
the battery level (full, medium and
low).
When the handset is on the base
station/charger, the bars flash until
charging completes.
The empty battery icon flashes.
The battery is low and needs
recharging.
The handset turns off if the batteries are empty.
If you are on the phone, you hear warning
tones when the batteries are almost empty. The
call gets disconnected after the warning.

What is standby mode?

Your phone is in standby mode when it is idle.
The handset name (or date and time) are
displayed on the standby screen.
Tip
•
Press and hold MENU/OK to switch between the
handset name and date and time display.
EN 9