Factory Default Settings
The following table lists the factory settings for the extender. You can use the Factory Reset
button or the Erase feature to return the extender to these settings. (See
to Its Factory Settings
Table 2. Factory settings
Feature
Setup Wizard
WiFi communication
WiFi network name (SSID)
Security
Transmission speed
Country/region
Operating mode
Data rate
DHCP
1. Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Technical Specifications
The following table includes the product specifications.
Table 3. Technical specifications
Extender Specifications
Network protocol and
standards compatibility
Power consumption
Physical specifications
Environmental
Interface
N300 WiF Range Extender
on page 24.)
Setting
Enabled
Enabled
NETGEAR_EXT
Disabled
1
Auto
Varies by region
802.11n, 802.11g, 802.11b
Up to 300 Mbps
Client enabled
Data and routing protocols: TCP/IP, DHCP server and client, DNS relay
100–240V 0.1 A, 50–60 Hz
•
Dimensions: 67 x 55 x 34 mm (2.64 x 2.17 x 1.34 in.)
•
Weight: 102–10 g (3.60–3.88 oz) varied by power plug type
•
Operating temperature: 32° to 140°F (0° to 40°C)
•
Operating humidity: 90% maximum relative humidity, noncondensing
•
Electromagnetic emissions: Meets requirements of FCC Part 15
Class B.
•
Local: 10BASE-T, 100BASE-Tx, RJ-45
•
802.11n, 802.11g, 802.11b
Supplemental Information
46
Return the Extender