NETGEAR WN3000RPv3 User Manual page 13

5. Complete the fields and click the NEXT button.
6. Click the WIFI RANGE EXTENDER button.
The extender searches for WiFi networks in your area and displays a list.
7. Select a WiFi network to extend and click the NEXT button.
8. In the Password (Network Key) field, type the existing WiFi network password (also called
passphrase or security key) and click the NEXT button.
9. Set the network name (SSID) and password for your new extender WiFi network and click
the NEXT button.
Wait for the page to display a list of available extended WiFi networks, which might take
up to one minute.
10. Use a WiFi network manager on the computer or WiFi device to connect to the new
extended WiFi network.
You must connect your computer or WiFI device before you click the Continue button.
11. Click the Continue button.
A message displays confirming that the extender is connected and ready.
12. Click the Next button.
The registration page displays.
13. Complete the registration fields and click the Finish button to complete the setup.
If you do not want to register your extender, click the Skip Registration link. Note that
you must register your extender before you can use NETGEAR telephone support.
The Status page displays.
14. Unplug the extender and move it to a new location that is about halfway between your router
and the area with a poor router WiFi signal.
The location that you choose must be within the range of your existing WiFi router
network.
N300 WiF Range Extender
Get Started
13