Maintenance; Troubleshooting; Technical Support - Hunter HFR15D-E Owner's Manual

Table of Contents

Advertisement

MAINTENANCE

1. Press the Power Button
of the unit to turn the heater OFF, unplug the heater before moving
or cleaning.
2. Interior dust can often be removed by using a vacuum cleaner
with a crevice tool attachment.
3. To clean the enclosure, use a clean, soft and lightly damp cloth
to gently wipe off the dirt from the surface of the unit. Be sure not
to wet the Heating Element and the switches. Allow the unit to dry
completely before use.
4. Do not use cleaning liquid or other chemicals to spray on the unit.
5. This heater is equipped with an easy to clean, washable static
filter. Regular cleaning and maintenance of your filter will ensure a
lifetime of trouble-free use.
Turn off heater, then locate the filter at the rear of the heater.
Loosen the 4 screws to remove the filter cover and take the filter
out of the bracket. (Figure 5)
Rinse the filter by spraying warm tap water through the rear
side of the filter (opposite of air intake direction) until the dust
and debris are cleared.
If the filter is extremely dirty or clogged with grease, you can
soak the filter in a mild solution of dish soap (such as Dawn) and
water, then brush with a soft brush and repeat rinsing process.
Shake the filter to remove excess water and lay on clean cloth
or paper towels to dry. Do not use heat source to dry the filter.
Replace the filter in the bracket. Align the holes of the filter cover
and tighten the 4 screws.
NOTE: Never operate heater without filter in place. Without the
filter in place, dust can accumulate on the infrared heaters causing
damage.
1. Perform the cleaning procedures described above.
2. Wipe all parts dry.
3. Pack the heater in a plastic bag and store it in a cool, dry place.
We recommend that you store the heater in its original carton.
TROUBLE SHOOTING
If your heater fails to operate:
Make sure the electrical outlet or circuit breaker is working.
Check for obstructions. If you find an obstruction, turn the
heater OFF, and UNPLUG THE UNIT. Carefully remove the
obstruction and follow the reset instructions.

TECHNICAL SUPPORT

If you have any additional questions or problems with your Hunter
Heater, please call:
USA: 1-888-880-3267
We open 24 hours a day, 7days a week. You may also reach us
online at www.HunterHomeComfort.com.
An electronic copy of this user manual can also be obtained online
at www.HunterHomeComfort.com.
and turn off the power switch in rear
STORAGE
8
81609-01 R20150420

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents