Related Manuals for Hunter 72004
Summary of Contents for Hunter 72004
- Page 1 Digital Ceramic Heater Digital Ceramic Heater Digital Ceram Digita a l Ceram With Remote Control With Model...
- Page 5 Parts of the Heater Symbols Control Panel Power Button 2. LED Display H/L Heat Button 3. Safety Grille Oscillation Button 4. Base High Temperature Setting Button Figure 1 5. Remote Control Low Temperature Setting Button 6. Power Light Timer Button (Figure 1) (Figure 2) Operation...
- Page 6 8. To turn the heater OFF, press the Power Button . The unit will first turn off the heating elements, the fan will be shut down 30 seconds later. Unplug the unit by pulling the plug from the electrical outlet only after the fan stopped. Oscillation Pressing the Oscillation Button will allow the heater to...
- Page 7 Remote Control (Figure 6) 1. The remote control uses two (2) "AAA" batteries (not included) for operation. 2. All the functions performed using buttons on the Remote Control work identically to the buttons on the Control Panel, except that you must use the buttons on the Control Panel to switch between Celsius and Fahrenheit temperature reading.
- Page 8 Check for obstructions. If you find an obstruction, turn the heater OFF, and UNPLUG THE UNIT. Carefully remove the obstruction and follow the reset instructions. If you have any additional questions or problems with your Hunter Heater, please call: USA: 1-888-880-3267 We open 24 hours a day, 7days a week.
Need help?
Do you have a question about the 72004 and is the answer not in the manual?
Questions and answers