Table of Contents
Advertisement
THERMAL CUT-OFF PROTECTION SYSTEM
This heater includes an Overheat Protection System that shuts
the unit off permanently when a potential overheat temperature is
reached. If this occurs, the heater can only resume its normal
operation after resetting it. To reset the heater:
1. Press the
Power Button
the on/off switch to the 'off ' position.
2.
Unplug the heater and wait 10 minutes for the unit to cool down.
3.
After the 10 minutes, plug the unit in again and operate normally.
CLEANING AND MAINTENANCE
1. Press the Power Button
on/off switch on the side to the 'off ' position. Allow the unit to cool
down and unplug the heater before moving or cleaning.
2. Interior dust can often be removed by using a vacuum cleaner
with a crevice tool attachment.
3. To clean the enclosure, use a clean, soft and lightly damp cloth
to gently wipe off the dirt from the surface of the unit. Be sure not to
wet the heating element and switches. Allow the unit to dry
completely before use.
4. Do not use cleaning liquid or other chemicals to spray on the unit.
WARNING: Any other servicing should be performed by an
authorized service representative.
1. Perform the cleaning procedures described above.
2. Wipe all parts dry.
3. Pack the heater in a plastic bag and store it in a cool, dry place.
We recommend storing the heater in its original carton.
TROUBLE SHOOTING
If your heater fails to operate:
Make sure the electrical outlet or circuit breaker is working.
Check for obstructions. If you find an obstruction, turn the
heater OFF, and UNPLUG THE UNIT. Carefully remove the
obstruction and follow the reset instructions.
to turn the heater OFF and press
to turn the heater OFF and press the
STORAGE
8
81616-01 R20210804
Advertisement
Table of Contents
