Table of Contents
Advertisement
6.5 System Settings
Operating Environment
Operating System
•
Windows XP (X86/X64) Home/Professional SP2 or
later
•
Windows 7 (X86/X64) Ultimate/Professional/Home
Premium
Compatible Web Browsers/Operating Systems
•
Windows Internet Explorer
•
Windows Internet Explorer 8/Windows XP
•
Windows Internet Explorer 8/Windows 7
6.5.1 How to Perform System
Settings Using a Computer
This section describes how to perform system settings,
such as method of receiving video conference calls,
using a computer.
Note
•
If you want to configure system settings using a
computer, make sure to complete initial settings
using the remote control first. If the initial
settings are not complete, you may not be able
to make settings for some parameters.
Starting and Operating a Terminal
Emulator
1.
Connect a computer to the RS-232C terminal on the
back of the unit using an RS-232C cable.
•
Prepare an RS-232C cable making sure that it
matches your computer's connector.
•
Use a straight cable for the RS-232C cable.
2.
Start a terminal emulator using the computer.
3.
Select Serial as the connection method.
4.
Set the serial port as follows:
Terminal parameters
Baud rate
(data transmission speed)
Data
(character bit length)
7/Windows XP
®
Value
38400
8 bits
Terminal parameters
Parity
(parity bits)
Stop
(stop bits)
Flow control
5.
Enter the login user name, then press [Enter].
•
The login user name is "admin".
6.
Enter the login password, then press [Enter].
•
The default login password is "HDVC_admin".
•
For details on changing the login password, see
Page 39.
7.
Enter "service stop", then press [Enter].
•
"Can not use during maintenance." is displayed
on the display.
8.
Enter a command, then press [Enter] (Page 38).
•
Enter a space between commands and
parameter values.
Example:
Command name
set: Change the setting.
get: Display the current value.
Value
9.
Enter "syssave", then press [Enter].
•
The value is saved as configuration data.
10.
Turn the power off, then back on, to restart the unit.
Note
•
You will be automatically logged out if there is
no activity for 5 minutes while logged in.
•
Settings cannot be changed during a video
conference call.
•
Using the [Ctrl] key when entering commands
may unintentionally activate other computer
features.
•
Some settings cannot be displayed by entering
terminal emulator commands.
6 Settings and Confirmation
Value
none
1 bit
none
Installation Manual
37
Advertisement
Table of Contents
