Download  Print this page

Siemens Gigaset A58h Manual page 10

Hide thumbs

Advertisement

First steps
Registering the handset to the base station
Before you can use the phone, you must first register the handset to the base sta-
tion. The actual registration procedure will depend on the type of base station.
Automatically register the handset to the Gigaset A580/A585
base station
Insert handset
into base
Handset is
registering
Please note
u
Each key press interrupts the automatic registration.
u
If automatic registration does not work, the handset will have to be regis-
tered manually.
u
The handset must be registered manually to an A580 IP base station.
Manually registering the handset
You must activate manual registration of the handset on both the handset (1) and
the base station (2).
1) On the handset:
¢
§Menu§
(If you require further information on the illustration of these operating steps,
please see
~
Handset is
registering
2) On the base station:
Within 60 sec. press and hold the registration/paging key on the base station
(approx. 3 sec.).
8
¤
Place the handset with the display facing up
in the base station.
Menu
The handset registers automatically.
Registration can take up to 5 minutes.
Do not remove the handset from the base station dur-
ë
ing this time.
¢
Settings
Handset
¢
page 17.)
Enter the system PIN of the base station (the default is 0000) and press
§OK§
.
The registration screen is displayed.
ë
¢
Register Handset

Advertisement

loading

  Also See for Siemens Gigaset A58h