You can deactivate the microphone in your
handset during an external call.
Press the display key to mute
Press the display key to switch
the microphone back on.
Making internal calls
Internal calls to other handsets registered
with the same base station are free.
Calling other handsets
Start internal call. The display
shows Insert INT No.
Enter the internal number of the
receiving handset and press
The handset is called.
Press the display key. All hand-
sets are called.
Ending a call
Press the End Call key.
CID 2.5 services
If CID is activated and a waiting call is dis-
played, 4 different CID 2.5 services (network
services) are selected.
During a call:
Select with q:
The waiting caller is forwarded to the
central office mailbox.
The waiting caller is put on hold and
hears a message to this effect from the
The waiting caller is prompted by the
central office to call again at a later time.
The central office is prompted to initiate a
When the handset is muted a waiting call
is not signaled on the display. To use the
CID 2.5 services the device must be
Press the display key