Sound Settings - Grundig 55 VLX 8572 BP User Instruction

PICTURE­/SOUND­SETTINGS
Sound­settings­
1­
Open the menu with »MENU«.
2­ Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3­
Select menu item »Sound« with »
and press » « to confirm.
V
– »Sound« menu is active.
Settings > Sound
Picture Sound Source
Sound Mode
Night Mode
Bluetooth
Select Bluetooth Device
Advanced
Restore Default Sound Settings
Change Area
Note:
Additional operations are explained in the
7
following sections.
Sound­Mode
1­ Select the line »Sound Mode« with »
» «.
Λ
< >
2­
Press » « or » « to select the desired op-
tion.
DTS­Studio­Sound™
DTS Studio Sound is an advanced surround
sound solution suite that accurately extracts and
places audio cues for an immersive surround
experience over the TVs built-in speakers. To
complete the audio experience, post processing
and psychoacoustic techniques are implemented
to provide 3D audio rendering to match content,
for bass and dialog enhancement and to deliver
consistent and level volume across content.
DTS Studio Sound Technology is supported in
Film, Natural, Speech and Music settings.
1­ Select the line »Sound Mode« with »
» «.
Λ
2­
Select the option »Movie«, »Natural«,
»Speech« or »Music« with »
30­ ENGLISH
«, »
V Λ
< >
« or »
Tuesday
xx xxx xxxx
TV Network Timer Parental
User
Off
Off
- - - -
Back Exit
BACK EXIT
« or
V
« or
V
< >
« or » «.
­ - ----------------------------------------------------------
Night­Mode
Night Mode prevents sound fluctuations and
volume increases.
«,
1­ Select the line »Advanced« from the Sound
menu with »
«
confirm.
2­
Select the line »Night Mode« with »
» «.
Λ
3­ Activate (»On«) or deactivate the night
mode by pressing »
Notes:
»Night Mode« appears in menu if »DTS«
7
has been selected in »Sound Mode«.
Other settings are available under »Ad-
7
vanced«. Select the line »Advanced« with
» « or »
V Λ
Switching­bluetooth­on­/­off­and­regis-
tering­an­external­BT­device
Bluetooth enables the television's audio signal
wireless to be sent to a registered BT device
(e.g. subwoofer).
The signal transmission is possible from the tele-
vision set to a Bluetooth-enabled device, only.
1­
Switch on the appropriate subwoofer and
start the registration on the subwoofer (see
subwoofer operating manual).
2­ Select the line »Bluetooth« with »
» « and switch on with »
Λ
– T he subwoofer is being searched for. After
a short time the subwoofer is displayed in
the menu.
3­
When the subwoofer has been found con-
firm with »OK« .
– T he name of the subwoofer is displayed in
the »Sound« menu.
For DTS patents, see http://patents.dts.com. Manufac-
tured under license from DTS Licensing Limited. DTS,
the Symbol, & DTS and the Symbol together are reg-
istered trademarks and DTS Studio Sound is a trade-
mark of DTS, Inc.
For DTS patents, see http://patents.dts.com. Manu-
factured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS 2.0+Digital Out is a
trademark of DTS, Inc.
« or » « and press »OK« to
V Λ
< >
« or » «.
« and press »OK« to confirm.
V
<
« or »
DTS, Inc. All Rights Reserved.
©
DTS, Inc. All Rights Reserved.
©
« or
V
« or
>
« (»On«).