USBRECORDING
C onnectingexternaldatamedia
Notes:
It is advised to put the television on stand-by
7
mode before connecting the Skype camera.
Before disconnecting the external data me-
7
dium, the television must first be switched to
standby, otherwise files can be damaged.
There are three USB inputs on the television,
7
namely USB1, USB2 and USB3.
USB1andUSB3input is intended for USB
devices that require additional power (e.g.
external hard disk).
LAN
Optic Out
SERVICE
ONLY
ANT IN
ANT IN
ANT IN
SCART / S-VHS / COMPONENT
1
Plug the external hard disk to the USB1or
USB3 USB interface of the television;
or
plug the memory stick in the USB2 socket
of the television.
-------------------------------------------------------------------------------------------
Notes:
The socket USB2 of the television supports
7
500 mA current according to the USB stan-
dard. Devices such as external hard disk
and etc. that consume more power can only
be connected to the USB1andUSB3USB
interface of the television.
If you are using a power cable for the
7
external hard disk that you have connected
to the USB1andUSB3 USB interface,
then the power cable of the external hard
disk must also be unplugged when the TV is
turned off.
You must not disconnect the USB Device
7
from the TV while a file on the USB Device
is being read by the TV.
ENGLISH
43