Sound Settings - Grundig 40 VLE 6522 BL User Instructions

SETTINGS
Sound­settings­
1 Open the menu with »MENU«.
2 Activate the menu item »Settings« with
»OK«.
3 Select the menu item »Sound Settings« with
> <
» « or » « and press »OK« to confirm.
– »Sound Settings« menu is displayed.
< Picture Settings
Sound Mode
Night Mode
Advanced
Note:
Additional operations are explained in the
7
following sections.
­ S ound­Mode
1 Select the line »Sound Mode« with »
» «.
Λ
< >
2 Press » « or »
art Mode«, »Movie« or »User«.
DTS­Studio­Sound™
DTS Studio Sound is an advanced surround sound
solution suite that accurately extracts and places
audio cues for an immersive surround experience
over the TVs built-in speakers. To complete the
audio experience, post processing and psycho-
acoustic techniques are implemented to provide
3D audio rendering to match 3D video content,
for bass and dialog enhancement and to deliver
consistent and level volume across content.
DTS Studio Sound Technology is supported in
Film, Natural, Speech and Music settings.
1 Select the line »Sound Mode« with »
» «.
Λ
2 Select the option »Natural SRS«, »Speech
SRS« or »Music SRS« with »
For DTS patents, see http://patents.dts.com. Manufac-
tured under license from DTS Licensing Limited. DTS, the
Symbol, & DTS and the Symbol together are registered
trademarks and DTS Studio Sound is a trademark of
DTS, Inc. © DTS, Inc. All Rights Reserved.
24­ ENGLISH
­------------------------------------------------------------------------------------------------------------------
Source Setup >

Sound Settings

Sound Settings
Natural
Off
Change Area Back
« to select the option »Stand-
< >
« or »
Night­Mode
Night Mode prevents sound fluctuations and vol-
ume increases.
1 Select the line »Night Mode« with »
» «.
Λ
2 Activate (»On«) or deactivate the night
mode by pressing »
Note:
»Night Mode« appears in menu if »SRS« has
7
been selected in »Sound Mode«.
Note:
Other settings are available under »Ad-
7
vanced«. Select the line »Advanced« with
» « or »
V
Exit
Stereo/dual­channel
If the device receives two channel programmes,
e.g. a film with the original sound on sound
channel B (display: »Dual II«) and the dubbed
version on sound channel A (display: »Dual I«),
you can select the desired sound channel.
« or
V
1 Select the line »Sound Type« with »
» « and adjust the setting with »
Λ
Equalizer
Equalizer offers a sound setting that you can cre-
ate.
Equaliser is active in the menu when »Sound
Mode« is selected as »User«.
1 Select the line »Advanced« from the Sound
Settings menu with »
»OK« to confirm.
2 Select the line »Equalizer« with »
and press »OK« to confirm.
– »Equalizer« menu opens.
3 It is active in »120Hz« frequency band.
Adjust the preferred value by using »
« or
V
>
» «.
4 Select the next frequency band with »
» « to repeat the adjustment procedure.
Λ
«.
5 To save adjustment, press »BACK
< >
« or » «.
« and press »OK« to confirm.
Λ
« or »
V Λ
« or
V
« or
V
< >
« or » «.
« and press
« or » «
V Λ
<
« or
« or
V
«.
<