CONNECTION/PREPARATION
S ettinguporhanging
Select a location so that no direct sunlight falls
7
on the screen.
S ettingupwithstand
To mount the stand, refer to the installation
7
instructions included.
Place the television set on a hard, level sur-
7
face.
P reparingformountingontheVESA
bracket
You will need:
A pair of scissors,
7
A crosstip screwdriver.
7
Follow the installation instructions for the VESA
bracket.Place the television set in the film on a
smooth surface with the screen facing down.
1
Cut open the film on the back side using the
scissors.
2
Connect the required cables to the connec-
tors on the television set. See the "Connec-
tion/Preparation" section in this manual.
3
Tie the cables so they do not hang down
onto the floor.
4
Screw the VESA bracket onto the television
set and mount it according to its installation
instructions.
-----------------------------------------------------
VESA
ENGLISH
USB 3
LAN
Optic Out
SERVICE
SATELLITE
ONLY
ANT IN
SCART / S-VHS / COMPONENT
11