Table of Contents
Advertisement
USBOPERATION
C onnectingexternaldatamedia
It is advised to put the television on stand-by
mode with »
8
« before connecting the external
data medium. Connect the device and then
switch the television on again.
Before disconnecting the data medium, the
television must first be switched to standby,
otherwise files can be damaged.
Notes:
The socket USB2 at the side of the televi-
7
sion supports 500 mA current according to
the USB standard. Devices such as external
hard disk and etc. that consume more
power can only be connected to the USB1
orUSB3 interface of the television.
To get higher efficiency from your devices
7
supporting USB 3.0 it is recommended to
connect to USB1orUSB3 interface.
If you are using a power cable for the
7
external hard disk that you have connected
to the USB1orUSB3 USB interface, then
the power cable of the external hard disk
must also be unplugged when the TV is
turned off.
You must not disconnect the USB Device
7
from the TV while a file on the USB Device
is being read by the TV.
A bi-directional data transfer as defined for
7
ITE (Information Technology Equipment)
devices in EN 55022/EN 55024 is not
possible.
USB transfer is not an operating mode in
7
itself. It is only an additional function.
--------------------------------------------------------------------------------------------
LAN
Optic Out
SERVICE
ONLY
SCART / S-VHS / COMPONENT
1 Connect the USB1orUSB3 USB interface
on the television and the related data output
on the external device (external hard disk,
digital camera, card reader or MP3 player)
with a USB cable;
or
plug the memory stick in the USB2 socket
at the side of the television.
R emovingtheexternaldata
media
Before removing the external data medium, log
off the data medium.
1
Open the menu with »MENU«.
2
Select the menu item »Media Center« with
»
confirm.
– » Media Player« menu is displayed.
3
Select the name of the data medium with
»
4
Select the »Media Options« with »TOOLS«.
5
Select the line »Disk Management« with
»
6
Select the line »Safely Remove Disk« with
»
7
Remove the data medium from the socket.
8
Press »EXIT« to end the setting.
ANT IN
ANT IN
ANT IN
<
>
«, »
«, »
« or »
V
Λ
« or »
« and press »OK« to confirm.
V
Λ
« or »
« and press »OK« to confirm.
V
Λ
« or »
« and press »OK« to confirm.
V
Λ
« and press »OK« to
ENGLISH
51
Advertisement
Table of Contents
