Panasonic WH-SXH09D0E8 Service Manual page 27

To avoid cable and cord harmed by sharp edge, cable and cord must go through bushing (located at the
3
bottom of indoor unit) before carry out electrical connection. The bushing must be used and must not take
off.
11.3.4.1 Connecting Requirement
The equipment's power supply 1 complies with IEC/EN 61000-3-2.
11.3.4.2 Wire Stripping and Connecting Requirement
Terminal screw Tightening torque N•cm {kgf•cm}
M4
M5
27
157~196 {16~20}
196~245 {20~25}