Appendix; Cleaning Lcd Tv; Function Of Product Safety Feature - Sanyo LCD-19K40 Instruction Manual

APPENDIX

Be sure to disconnect the AC Power cord from AC outlet before cleaning the LCD TV.
Clean your LCD TV as follows:
● Gently wipe the screen and cabinet with dry soft cloth.
● The screen is likely to be damaged if it is not maintained properly. Do not use hard objects
like a hard cloth or paper. Do not use solvents or abrasions.
CAUTION :
Do not use benzene, thinner, or any volatile substances to clean the LCD TV. These
chemicals may damage the cabinet finish.

FUNCTION OF PRODUCT SAFETY FEATURE

For protecting product safety, protection feature provided inside LCD TV. Refer to the
following please.
When a trouble is detected in the LCD TV, the protection function works and turn the LCD TV
OFF automatically. When the LCD TV is turned OFF with this function, the POWER indicator
becomes red and LCD TV's power cannot be turned ON.
Disconnect Power cord and contact sales dealer where you purchased the LCD TV or the
service center.
To turn on LCD TV again for checking:
1) Disconnect Power cord from AC outlet and plug it on again.
2) Refer to "TURNING ON/OFF LCD TV" on Page 15 to attempt to turn on LCD TV.
If LCD TV is not turned on, disconnect Power cord and contact to service center.
36

CLEANING LCD TV

AUTO POWER OFF