Basic Operation; Turning On/Off Lcd Tv; Plug & Play - Sanyo LCD-19K40 Instruction Manual

BASIC OPERATION

1
Complete the peripheral connections before turning on LCD
TV. (Please refer to "CONNECTING LCD TV".)
2
Connect LCD TV's AC Power Cord into an AC outlet.
3
Press POWER ON/OFF button on Side Controls of LCD TV
or on Remote Control to turn it ON. The POWER indicator
will light up (green). Press POWER ON/OFF button again
to shift it to stand-by status, the POWER indicator will become
red.
NO SIGNAL SHUT OFF
This TV set incorporates the NO SIGNAL SHUT OFF function.
If no signal is input in TV mode, "OFF 00:10" will display for
about 10 minutes and TV will be turned off automatically.
By PLUG & PLAY, when the TV reset and powered on for the
first time, it will automatically search and preset all the receivable
TV programs.
1
Plug the power, connect the antenna, and press Main Power
ON/OFF button, the TV set will automatically search the
programs.
2
After programs searching, SHOP MODE menu will appear.
Press POINT ◄► buttons to select and press ENTER
button for SHOP MODE or HOME MODE. Then the pop
up menu disappears. For the details, please refer to
"SHOP MODE" on page 30.
3
Auto searching completed and message "AUTO SET-UP
COMPLETED HAPPY VIEWING!" appears. About 5 seconds
later, the TV set will automatically return to programme
position "1".
Note:
● Message "NO STATION PLEASE CONNECT ANTENNA PLUG!"
will appear if there is no TV stations are searched after
automatically programs searching.(see Figure A.) Then
SHOP MODE menu appears, the same operations as step 2
above will be excuted and returns to normal TV picture.
● Press MENU button while searching programs, message
"PLEASE SELECT AND PRESS ENTER BUTTON" appears
(see Figure B), press POINT◄► buttons to select
"TEMPORAL CANCEL" or "PERMANENT CANCEL".
- "TEMPORAL CANCEL" to cancel temporary PLUG & PLAY
function. The PLUG & PLAY function is actived only in TV
mode while turning on the LCD TV.
- "PERMANENT CANCEL" to cancel permanetly PLUG &
PLAY function. When turn on television the PLUG & PLAY
is not actived.
Press ENTER button to enter SHOP MODE menu. the same
operations as step 2 above will be excuted and returns to
normal TV picture.
18
TURNING ON / OFF LCD TV
PLUG & PLAY
SIDE CONTROL
POWER ON/ OFF
button
REMOTE CONTROL
POWER ON/
OFF button
I AM SEARCHING ALL PROGRAMMES
PLEASE WAIT!
MENU : CANCEL
PLEASE SELECT AND PRESS ENTER BUTTON
HOME MODE SHOP MODE
: SELECT ENTER : ENTER
AUTO SET-UP COMPLETED
HAPPY VIEWING!
Figure A.
NO STATION
PLEASE CONNECT ANTENNA PLUG!
Figure B.
PLEASE SELECT AND PRESS ENTER BUTTON
TEMPORAL CANCEL PERMANENT CANCEL
: SELECT
ENTER : ENTER
1