Sanyo LCD-19K40 Instruction Manual page 35

AC POWER MODE
You can set "STAND", "LAST" or "ON" in AC POWER MODE.
Use this feature to set TV condition when AC cord plug-in.
● STAND
- When AC cord plug-in, LCD TV always STAND-BY.
● LAST
- When AC cord plug-in, the LCD TV will depend on last TV
condition. (ON or Stand-by)
● ON
- When AC cord plug-in, LCD TV always ON.
START VOLUME LEVEL
You can select "OFF" or "1-100" in START VOLUME LEVEL.
Use this feature to set volume bar level position every time
TV turned on.
Note:
Even Start Volume Level set to higher value then Volume Lock,
the Start Volume Level value automatically set to Volume Lock
value.
MUSIC MODE SETUP
MUSIC mode is used to block picture on channel program.
Use this feature to set Music Mode condition in set 5
Position Channel.
1
Press and hold Menu button on Side Controls, and press
INFO button on remote control to display Dealer mode menu.
Press POINT ▲▼ buttons to select MUSIC MODE SETUP.
2
Press POINT ◄► buttons or ENTER button to enter into
MUSIC MODE SETUP menu.
3
Press POINT ▲▼ buttons to select the item desired.
4
Press POINT ◄► buttons to enter the item selected.
■ Press BACK button to return to the previous menu.
■ Press MENU button or wait to exit menu operation.
Note:
When the channel set with Music mode is selected, Eco mode
is ON.
RESET
This function returns all setting values to the factory
default settings.
DEALER MODE
DEALER MODE
VOLUME LOCK
OFF
TUNING LOCK OFF
START MODE
OFF
OFF
OSD
RC OFF
AC POWER MODE STAND
OFF
START VOLUME LEVEL
MUSIC MODE SETUP
RESET
: SELECT
: ADJUST : BACK
MUSIC MODE SETUP
MUSIC MODE POS1
MUSIC MODE POS2
255
MUSIC MODE POS3 255
255
MUSIC MODE POS4
MUSIC MODE POS5 255
: SELECT : BACK
: ADJUST
: EXIT
1
: EXIT
35