Summary of Contents for Weslo Easy FitWLIVEL85012.0
Page 1
EasyFit. by WESLO USERʼS MANUAL Model No. : WLIVEL85012.0 Serial No ___________ Serial number decal Write the serial number in the space above for reference. QUESTIONS ? If you have questions, or if there are missing parts, please contact us:...
IMPORTANT PRECAUTIONS WARNING : To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your elliptical before using your elliptical. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
BEFORE YOU BEGIN Thank you for purchasing the WESLO® Easy Fit. number and serial number before contacting us. The elliptical provides an array of features de- The model number is WLIVEL85012.0 and the lo- signed to make your workouts at home more ef- cation of the serial number decal are shown on the fective and enjoyable.
ASSEMBLY Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tool(s), assembly requires an adjustable wrench and a Phillips screwdriver .
Page 6
STEP 1 Fix the Front stabilizer (3) and Rear stabilizer (4) to the Main frame (1) with Carriage bolt (12), Arc washer (13) and Acorn nut (14) STEP 2 While another person holds the Upright (2) near the Frame (1), connect the Extension Wire (18) to the sensor Wire (20).
Page 7
STEP 3 A: Fix the Swing bar (6L) on the long axle of the Handlebar post (2) with Hex bolt (24), Spring washer (52), Flat washer (25), Waveform washer (54) and Long axle (27) as shown. Please do not tighten them this time.
Page 8
STEP 5 Connect the Pulse sensor wire (50) and Extension wire (18) with the wires coming from the Computer (9), and then fix the Computer (9) onto the computer bracket of the Handlebar post (2) with Cross screw (55). Now your machine is ready for use.
HOW TO USE THE ELLIPTICAL HOW TO EXERCISE ON THE ELLIPTICAL MEASURE YOUR HEART RATE IF DESIRED EXERCISER You can measure you heart rate using the To mount the elliptical exerciser, hold the upper body handgrip pulse sensor. arms and step onto the pedal that is in the lowest position.
CONSOLE FEATURES values will be reset. SET: Press this button to set the selected values when not in Scan mode. Set a value which will countdown on any functions of time, distance and calorie. when the value will goes to zero than the computer will alarm for 15 seconds.
EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your Before beginning this or any exercise pro- body uses carbohydrate calories for energy. Only af- gram, consult your physician.
MAINTENANCE AND TROUBLESHOOTING IInspect and tighten all parts of the exercise cycle small amount of mild detergent. regularly. Important: To avoid damaging the console, keep Replace any worn parts immediately. liquids away from the console and keep the console To clean the exercise cycle, use a damp cloth and a out of direct sunlight.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...
Need help?
Do you have a question about the Easy FitWLIVEL85012.0 and is the answer not in the manual?
Questions and answers