Panasonic NR-BK266SN Service Manual page 12

6.4. Replace FC, PC door
6.4.1. Replace FC door
Disassembly FC door
cover hinge top
1
2
1. Close the FC door then remove cover hinge top:
- Pull follow direction 1.
- Push up follow direction 2.
2. Unscrew 3 screws, then lift up the FC door.
3. To remove the hinge top cap: push up then push out follow the direction of the arrow.
Assembly FC door
1
hinge center
1. Apply grease to the areas of No. 1& No. 2 of hinge center.
2. Put FC door : pin of hinge center fit to the hole of latch door.
3. Assembly hinge top: screw follow the order No.1, 2,3.
1. Use Torque driver to check force at screw 1, 2, 3 position. Standard is 600± 200cN.m.
Then assembly cover hinge top.
2. Deviation between FC door and side of cabinet is a≤1mm.
3. Apply grease to the line of gasket door FC as figure to avoide the twist of the gasket door.
2
a
- 13 -
screw
cap hinge top
2
3
1
screw
position applied