Panasonic NR-BK266SN Service Manual page 11

6.2.3. Door switch
1. Push to the left then pull out door switch.
6.3. Machine room
6.3.1. PCB, Supply cord & harness as wire main, MF capacitor, Relay, Motor protector
capacitor box
1
Protector cover Pan water eva
Connector
4
MF capacitor
Motor
2. Pull down the door switch lightly,
then undo connector.
2
screw
clamp
5
1. Remove the pan water eva.
2. Unscrew 2 screws.
3. Press on hooks to open the capacitor box.
4. Disconnect 4 connectors.
5. Push on two clamps to take out PAS-Main.
6. Remove the protector cover. Pull out PTC relay and
motor protector from compressor.
7. Undo two claims with harness as wire main to
Relay
take out Motor protector and PTC relay.
- 12 -
connector
3
Pas-main
6
hook
Motor protector
Relay